You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
BB GXP System
- Thread starter Ivo
- Start date
shadowlord
Member
Re: BB GPX System
Antes de mais é GXP.
Citando o site da Truvativ:
"While other systems rely on side loading the bearings to eliminate play, which causes premature bearing wear, the GXP system is different. The GXP system captures the left side bearing between the spindle and the left crankarm while allowing the drive-side bearing to float axially on the spindle, thereby eliminating the necessity to side-load bearings during adjustment. The simplicity of installation is refined: once it is tightened to the proper specifications you are ready to roll with a worry free BB. The GXP system uses two bicycle specific cartridge bearings and eight seals for a smooth and long lasting ride."
Antes de mais é GXP.
Citando o site da Truvativ:
"While other systems rely on side loading the bearings to eliminate play, which causes premature bearing wear, the GXP system is different. The GXP system captures the left side bearing between the spindle and the left crankarm while allowing the drive-side bearing to float axially on the spindle, thereby eliminating the necessity to side-load bearings during adjustment. The simplicity of installation is refined: once it is tightened to the proper specifications you are ready to roll with a worry free BB. The GXP system uses two bicycle specific cartridge bearings and eight seals for a smooth and long lasting ride."
Olá
Corrigido! :mrgreen:
Obrigado pela explicação!
Já agora este sistema funciona? Ou é só markting? É que normalmente só se ouve falar em Shimano XT, XTR etc...
Cumps,
Ivo
shadowlord said:Antes de mais é GXP.
Corrigido! :mrgreen:
shadowlord said:Citando o site da Truvativ:
"While other systems rely on side loading the bearings to eliminate play, which causes premature bearing wear, the GXP system is different. The GXP system captures the left side bearing between the spindle and the left crankarm while allowing the drive-side bearing to float axially on the spindle, thereby eliminating the necessity to side-load bearings during adjustment. The simplicity of installation is refined: once it is tightened to the proper specifications you are ready to roll with a worry free BB. The GXP system uses two bicycle specific cartridge bearings and eight seals for a smooth and long lasting ride."
Obrigado pela explicação!
Já agora este sistema funciona? Ou é só markting? É que normalmente só se ouve falar em Shimano XT, XTR etc...
Cumps,
Ivo